| Część nr | Producent | Zastosowanie |
|---|
| AT25320T1-10TI | Atmel | SPI serial EEPROM, 32K (4096 x 8), 2100kHz, 4.5V to 5.5V |
| AT49F001NT-12VI | Atmel | 1-Megabit (128K x 8) 5-volt only flash memory, 50mA active, 0.3mA standby |
| AT24C01-10TC | Atmel | 2-wire serial EEPROM 1K(128 x 8) |
| AT49F8192T-90TI | Atmel | 8-Megabit (512K x 16) 5-volt ohly CMOS flash memory, 50mA active current, 0.3mA standby current |
| AT27C4096-55VI | Atmel | 4-Megabit (256K x 16) OTP EPROM |
| AT49BV002N-12PC | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.1mA standby |
| ATV2500H-30DC | Atmel | High-density UV-erasable programmable logic device |
| AT27LV520-90TC | Atmel | 512K (64K x 8) multiplexed addresses/outputs low voltage OTP EPROM, 8mA active |
| ATV2500H-25LM/883 | Atmel | High-density UV-erasable programmable logic device |
| AT49LV020-12TI | Atmel | 2-Megabit (256K x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| AT49LV020-12JI | Atmel | 2-Megabit (256K x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| AT25HP512-10PC | Atmel | SPI serial EEPROM 512K(65,536 x 8),fmax 10000 kHz,twc(max) 5ms |
| ATV2500BQ-20KC | Atmel | High-speed high-density UV erasable programmable logic device |
| AT89C55-16JA | Atmel | 8-Bit microcontroller with 20K bytes flash,5V power supply |
| AT90S2343-10PI | Atmel | 8-bit microcontroller with 2K bytes of in-system programmable flash, 4.0-6.0V |
| AT89C52-16PA | Atmel | 8-bit microcontroller with 8K bytes flash,5V |
| AT49LV001T-90JI | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.3mA standby, 3.0V to 3.6V |
| AT27BV512-90TI | Atmel | 512K (64K x 8) unregulated battery-voltage high speed OTP CMOS EPROM, 8ma active current, 0.02mA standby current |
| AT29C257-70JI | Atmel | 256K (128K x 8) 5-volt only CMOS flash memory |
| AT27C1024-45JC | Atmel | 1-Megabit (64K x 16) OTP EPROM |
| AT49BV002N-90VI | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.3mA standby |
| ATF2500C-20PC | Atmel | High-performance, high-density, electrically-erasable programmable logic device, 20ns |
| AT89C51-20QI | Atmel | 8-bit microcontroller with 4K bytes flash, 5V, 20MHz |
| AT49LV001N-90VI | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.3mA standby, 3.0V to 3.6V |
| AT27C800-12RC | Atmel | 8-Megabit (512K x 16 or 1024K x 8) UV erasable EPROM, 50mA active, 0.1mA standby |
| AT28HC64B-12PI | Atmel | 64K(8K x 8) high speed CMOS EEPROM with page write and software data protection |
| AT24C02-10PI-1.8 | Atmel | 2-wire serial EEPROM 2K(256 x 8) |
| ATF22LV10C-10JC | Atmel | High performance EE PLD, 3V to 5.5V |
| AT24C02-10SI-2.5 | Atmel | 2-wire serial EEPROM 2K(256 x 8) |
| AT25128N1-10SC-1.8 | Atmel | SPI serial EEPROM 128K (16384 x 8), 500kHz, 1.8V to 3.6V |
